My Cart: 0 item(s)
EGW Trijicon RMR / SRO, Holosun 407c / 507c Adapter Plate For Walther Q5 Match (Optics Ready)
Mounting Hardware is Included
This mount fits:
- Walther Q4 Steel Frame OR
- Walther Q4 Tac M1
- Walther Q4 Tac M2
- Walther Q5 Match M1
- Walther Q5 Match M2
- Walther Q5 Match Steel Frame Standard
- Walther Q5 Match Steel Frame Potential
- Walther Q5 Match Steel Frame Standard 10RD
This mount does not fit:
- Walther Q5 Match SF Arabesque
- Walther Q5 Match SF Patriot
- Walther Q5 Match SF Black Diamond
- Walther Q5 Match SF Match Black Tie
- Walther PDP
Please note: Trijicon recommends the use of a sealing plate to prevent water from entering their red dots.
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.968"
Overall Width: .99"
Torque Specs: 15 in/lbs
Red Dot Fitment:
- Trijicon SRO
- Holosun HE407C
- Holosun HE507C
- Holosun HS407C
- Holosun HS507C
- Swampfox Kingslayer
- Swampfox Liberty
- Swampfox Justice
EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
The screws that are included with this mount require a 5/64'' allen wrench for installation.
Trijicon Quick links
The distinction between inferior quality and premium RMR Mount is undeniable. At MSP, we only offer Walther Q5 Match accessories from the most trusted brands like Evolution Gun Works. Buy with confidence that we stand behind the product we sell.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.
Customer Ratings & Reviews
Ratings Snapshot
out of 5
5
(2)
4
(1)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
out of 5
5
(2)
4
(1)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
3 Total Reviews
- 1
Mounting plate for red dot on Walther q5
Drew
Location: Cleveland Ohio
Date:
April 16, 2024
My mounting plate arrived quickly .. 2 days It fit my red dot and my gun perfectly. It was made of quality steel did not scratch easily when mounting it the cost was 1/3 of other sites and far less then the one made by Walther.. Walther shipping time was far beyond my patience to try out my new toys :)) Definitely the real deal definitely worth trusting and using this company.. Andy
Verified Buyer
Recommended
Mounting plate for red dot on Walther q5
Drew
Location: Cleveland Ohio
Date:
April 16, 2024
My mounting plate arrived quickly .. 2 days It fit my red dot and my gun perfectly. It was made of quality steel did not scratch easily when mounting it the cost was 1/3 of other sites and far less then the one made by Walther.. Walther shipping time was far beyond my patience to try out my new toys :)) Definitely the real deal definitely worth trusting and using this company.. Andy
Verified Buyer
Recommended
Quality plate
lawmonkey13
Location: Tennessee
Date:
July 6, 2023
Quality plate. Seems robust. Did not come with the proper screws for my q4 though.
Verified Buyer
Recommended
3 Total Reviews
- 1
