Weaver #S46 (48227) Steel Top Mount Base (Matte Black)
Not Yet Rated | Write the First Review SKU: 105-WVR-48227
UPC: 076683482273
Manufacturer: Weaver
MFG#: Weaver 48227

Weaver #S46 (48227) Steel Top Mount Base (Matte Black)

Weaver's precision-built steel bases are machined to tight tolerances for a custom fit. A square-cut notch mates to the sturdy cross bolt in every Weaver® top mount Ring. Custom-hardened fastening screws included

Rear base for:

• Navy Arms Country Boy Muzzleloader
• Savage Axis Series, 10, 12, 110, 112 - all long & short action AccuTrigger, 10 ML II
• Stevens Savage/Stevens 200
• Winchester 52 - hole spacing same

Front base for:

• Anschutz 1568
• Beretta Mato Rifle
• Browning Bolt Action BBR, Hi-Power, other caliber, older models, BBR Bolt Action, long & short actions
• Churchill 950, 950-C, 972-C
• Colt 57
• Cooey 71
• Enfield with receiver cut down like a Winchester 70
• H&R 300, 301, 330 & 370 (Pre 1973), 300 & 301 long action in 270, 30-06, 7mm & 300 Win (1973+)
• Herters J9
• High-Standard High-Power
• Interarms Viscount
• Marlin 455, MR7
• Mauser Receiver Ring about 1.410" diameter - 98FN, Receiver Ring about 1.300" diameter (Swedish 96), Bauer 3000 & 4000
• Musgrave Mark I, II, III & IV
• Navy Arms Country Boy Muzzleloader
• Parker Hale 1000, 1000C, 1100, 1200 & 1700
• Savage Axis Series, 10, 12 & 16 - short actions, Striker, Pistol, 510, 512, 516 S/A, 10 ML 2-piece only, pre 2003 models, 110, 112, 116 - long actions; 210 Shotgun - use X-high rings, pre 2003 models, 10, 12, 110, 112 - all long & short action AccuTrigger, 10 ML II
• Sears 50, 51, 51L, 53
• Smith & Wesson Mauser Actions with small receiver ring about 1.30" diameter
• Stevens 110E, Savage/Stevens 200
• Voere 2150, 2165/1, 2165/2, 2165/3 & 2165/4 - Mauser action
• Weatherby FN Mauser style actions
• Winchester 52 - hole spacing same, 70 Long Action - hole spacing the same, 670, 770, 70 Long Action - hole spacing different & 70 Super Express, 70 Short Action (1984+)

Note: Savage 10, 12 & 16 - short actions. Striker, Pistol, 510, 512, 516 S/A, 10 ML - 2-piece only pre 2003 models - for shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra .689"

Note: Savage / Stevens 200 - for shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra .689"

Note: For the Mauser Receiver Ring with about 1.410" diameter - 98FN and the Receiver Ring about 1.300" diameter (Swedish 96) shimming is probably required for perfect scope alignment. The rear base may require modifications for correct fit to military actions

Note: For the Winchester 52 with the hole spacing the same; may require bolt and/or safety alteration, otherwise firearm cannot function safely and properly. Consult with a qualified gunsmith

Note: The handiest way to pinpoint the correct base for the Winchester 52 & Winchester 70 Long action Rifles is to check the spacing of the tapped holes for the rear base and compare it to the hole spacing for the front base.
If the hole spacing is the same, then for model 52 use 46+ 46 and for model 52 use 25+ 57.
If the hole spacing is different, then for model 70 use 47+ 46 and for model 70 use 49A+ 46

This scope mount will work with Weaver style scope rings.

Color Mount:
105-WVR-48227 Matte Black