Ghost Rocket Connector Trigger Installation Kit for Glocks GEN 1-5

10

| Write a Review

Ratings Snapshot

4.7

out of 5

5 (7)

4 (3)

3 (0)

2 (0)

1 (0)

Would recommend this product.

100%

SKU: 113-GHO-RIK-6
UPC: 644406909446
Manufacturer: Ghost Inc
MFG#: GHO_RIK

I used the connector in this kit and loved it. But I didn't like the feel of the trigger or firing pin springs. After trying all combinations and test firing at the range, The only spring I did use was the reduced weight safety plunger spring. I kept the other springs stock OEM. This combo gave me just what I was looking for. Slightly lighter pull increased accuracy, and maintained reliability. I have over 500 rounds on this combo with no malfunctions using cheaper range ammo.

This Glock trigger connector is as good as the reviews I read about. It took approximately 15 minutes to install. Using my Dremel and caliper to measure how much I was removing the install was very easy. Installed in Glock 34, a very nice improvement over the stock setup. While apart cleaned and polished everything. Great product, easy to follow installation, nice improvement....can't ask for more. Now to reload another 2k to shoot

Have probably done at least 50 trigger kits/jobs to Glocks. Used to use the factory 3.5 connector, then switched to the ghost rocket connector. MUCH better, but ghost went 1 step further and included the return spring, firing pin spring, AND plunger spring. For the money, you CANT beat what this does to your trigger. I WILL say that if you use the lightened firing pin spring, I haven't had luck with any primers OTHER than federals, Winchesters, CCI, and Wolff are TOO think and hard to be set off reliably... but for everyday use, use this kit, and leave the factory firing pin spring in the gun. Youll be pleased, I'm getting trigger pulls ON a gauge of 3-3.5 and VERY smooth.

I am a 35-year gunsmith and have done work on many Glocks. The Glock Ghost rocket connector is by far the easiest and best trigger upgrade I have come across. This product requires minimal fitting to get it to work, and you end up with excellent results. As an LEO, I don't recommend putting this in a duty weapon, but for my competition guns, I have one in all three know.

I got this for my USPSA race gun, a Glock 34. There are a lot of trigger kits out there, but I wanted something that was proven and had all the parts I wanted. Installation was relatively easy. However, the connector requires a tab to be filed down with a metal file to work correctly. The downside is it can be kind of tedious, and you may have to remove the firing pin before you can remove the slide. You may need to install the ghost rocket 3.5 trigger connector kit a few times before it's finished. The upside is the part is now custom-tailored for your gun, and the trigger pull is set the way you like it. After filing the connector part several times, the trigger travel was where I wanted it. The trigger feel is light, travel is moderately short, and the reset is crisp. I installed all the included springs but wasn't sure if the lightened trigger spring would cause light primer strikes and misfires. Not to worry. It shot 100/100 at the range the next day. This kit is a great value, and installation is not complicated. The result is a great competition-oriented trigger. As a bonus, the Glock takedown tool/punch is included; something you'll use whenever you want to take the gun apart to clean it.

I currently own 3 Glocks (19, 21, and 17L) among an extensive collection. I am a civilian firearms instructor for a variety of military personnel. I installed the Glock ghost rocket connector trigger kit on my 19, and the trigger pull dropped from 5.9 to an average of 3.0 pounds...that's lighter than my competition 17L. It took a few times to file the connector and reassemble the weapon, but it was worth it. I fired it about 50 times with our standard training ammo and if functioned 100%. It is a very different trigger pull and reset from a standard Glock so practice a bit before relying on it. I will be ordering another kit...

This is a good deal. It made the trigger pull a lot smoother, lighter, and less let off to reset. The only problem I had with the Ghost rocket trigger was the 4lb. Firing pin spring wasn't strong enough to set off the rounds; I had about 35% that failed. Easy fix, I just put the factory spring back in; all other springs worked good.

I've used Zev race, Zev Pro, Glock dot, and a few other Glock connectors. This Ghost ultimate 3.5 connector does what it says, the trigger pull is around 3.25 - 3.5 lbs with a 5# Wolff striker spring installed. Wall is crisp and not as spongy as some of the other 3.5 connectors. Also, the Zev race connector would release the striker on reset if the muzzle was pointed down.

Between the rocket connector with the Spaulding cut, honing, and polishing with metal polish, my glock trigger rivals $150-200 drop in kits...definitely in terms of value for sure. I am extremely happy with my purchase.

Overall a very good product, please bring more address to your web site for instructions. Using "You Tube" for instructions miss some very important details such as fitting and grinding. The first day my weapon would not cycle then I went to your site which also doesn't detail the area for grinding without a little search. Now that the "Connector" is operational my handgun fired over 200 rounds until it's first misfire. The trigger worked flawlessly and I am very please with the shorter trigger travel and the crispness of the trigger. Kudos to the "Ghost Trigger"