EGW Trijicon RMR / SRO, Holosun 407c / 507c Sight Mount Adapter for Sig P365X & P365XL Optics Ready
Not Yet Rated | Write the First Review SKU: 198-49549
UPC: 841370118472

EGW Trijicon RMR / SRO, Holosun 407c / 507c Sight Mount Adapter for Sig P365X & P365XL Optics Ready

Enhance your shooting experience with the Trijicon RMR / SRO, Holosun 407c / 507c Sight Mount Adapter, specifically designed for the Sig Sauer P365 Optics Ready pistol. This mount allows you to seamlessly attach a Trijicon RMR red dot sight to your firearm.

This mount fits:

• Sig Sauer P365X Optics Ready
• Sig Sauer P365XL Optics Ready (Will only fit models that have rear sight incorporated in cover plate)

This mount does not fit:SRO

• Sig Sauer P365 SAS
• Sig Sauer P365XL With Stand Alone Rear Sight
• Sig Sauer P365 XMACRO

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"

Mounting Hardware:
(2) 6-32 Flat Head Screws - Requires use of 5/64" Hex Key
(2) M3 x .5 x 8mm Flat Head Screws - Requires use of 2mm Hex Key

Red Dot Fitment: 

• Trijicon RMR
• Trijicon SRO
• Holosun HE407C
• HE407C X2
• HE507C
• HE507C X2
• HS407C /
• HS407C X2
• HS507C
• HS507C X2,
• Swampfox Kingslayer
• Liberty
• Justice

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Product Details

This mount fits the Sig Sauer P365 Optics Ready pistol and will allow you to mount a Trijicon RMR red dot sight. Simply remove the rear sight on your gun and replace it with our mount. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight plate*
- Install the EGW Sight Mount on the slide
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Flat Head Cap Screws - Provided for Trijicon RMR

The screws that are included with this mount require a 5/64'' allen wrench for installation.

Whether you're a professional shooter or a firearm enthusiast, this sight mount adapter is a must-have accessory to elevate your shooting accuracy and experience.