EGW Red Dot Mount for the Docter, Burris Fastfire, Vortex Venom, and Vortex Viper for CZ 75, 75 SP-01 Phantom, 85, 97, P01, and PCR Sight Mount
This Evolution Gun Works - EGW mounts fits:
- CZ 75
- CZ 75 SP-01
- CZ 75 SP-01 Phantom
- CZ 75 SP-01 Shadow*
- CZ 85
- CZ 97B
- CZ 97D
- CZ P-01
- CZ PCR (there will be a gap under the front of the adapter plate)
- Tristar P120
This mount does not fit:
- CZ P-07
- CZ P-09
*We have found that our mount may work with some models of the 75 SP-01 Shadow and may not work with others. Please measure the depth of the dovetail cut from the front of your slide. If the depth measures .133", our mount will not be a drop in part for your application.
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Torque Specs: 15 in/lbs
Mounting Hardware:
(2) 6-32 Button Head Screws
(2) 6-32 Flat Head Screws
(1) 6-32 Set Screw
Red Dot Fitment:
- Vortex Viper
- Vortex Venom
- Burris FastFire
- Docter
- ADE RD3-001
- ADE RD3-002
- ADE RD3-009
- UTG Reflex Micro Dot
- Crimson Trace CTS-1200
- Crimson Trace CTS-1300
- Sightmark Mini Shot
- Sightmark Core Shot
The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.
*All ADE mounts require 6-32 x 3/8" screws.
Please note: We have found that some red dots commonly found on Amazon such as the UTG and ADE may not hold the same tolerances as the red dots that this mount was initially created to work with. These dots may not fit properly on the posts on the plate. We would recommend either sending the red dot back for an exchange to whichever seller you purchased it from, or open up the holes in the bottom of the red dot to accommodate the pins.
Details:
EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights
The screws that are included with this mount require a 5/64'' allen wrench for installation.
Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Alt Description:
- CZ 75 Vortex Venom mount
- CZ 75 SP-01 Vortex Venom mount
- CZ 85 Vortex Venom mount
- CZ 97B Vortex Venom mount
- CZ 97D Vortex Venom mount
- CZ P01 Vortex Venom mount
- CZ P07 Vortex Venom mount
- CZ P09 Vortex Venom mount
- CZ PCR Vortex Venom mount
- Tristar P120 Vortex Venom mount
- CZ 75 Red Dot mount
- CZ 75 Red Dot mount
- CZ 75 SP-01 Red Dot mount
- CZ 85 Red Dot mount
- CZ 97B Red Dot mount
- CZ 97D Red Dot mount
- CZ P01 Red Dot mount
- CZ P07 Red Dot mount
- CZ P09 Red Dot mount
- CZ PCR Red Dot mount
- Tristar P120 Red Dot mount
- CZ 75 Accessories
Red Dot Mount Quick Links:
- egw red dot mount
- glock 43 red dot mount
- ak red dot mount
- dovetail red dot mount
- red dot mount
- offset red dot mount
- glock red dot mount
- ak47 red dot mount
- m&p shield red dot mount
- ak 47 red dot mount
- sig p320 red dot mount
- ruger mark iv red dot mount
- best glock dovetail red dot mount
- mossberg 500 red dot mount
- mossberg 590 red dot mount
- kimber 1911 red dot mount
- hk vp9 red dot mount
- glock red dot mount with iron sights
- carry handle red dot mount
- canik tp9sf red dot mount
- s&w 686 red dot mount
- cz p07 red dot mount
- sig p365 red dot mount
- 1911 novak red dot mount
- p320 red dot mount
- cz p10c red dot mount
- s&w revolver red dot mount
- revolver red dot mount
- red dot mount for ar15
- ar-15 red dot mount
- ar15 red dot mount
- ar red dot mount
The distinction between inferior quality and premium scope mount is undeniable. At MSP, we only offer red dot mounts from the most trusted brands like Evolution Gun Works. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
- 1
Set screw too short to retain on CZ75
During the installation and tightening the set screw , with blue thread locker, felt ok but after 200 rounds came loose. Tried to reposition the mount and retighten the set screw. The set screw seemed too short and did not bottom out in the slide. Set Screw should have been 2mm longer.
Export item
The order was easy and the delivered too. I recommend this web site and the product.
Nice product
Is what it says it is. Good solution to add a red dot without milling the slide.
CZ p07 red dot mount
This CZ p07 optic mount was tight going into the sight slot, to the point where I'm pretty sure it's a permanent fixture of my slide now, even without the set screw and Loctite. I almost thought it wouldn't go in, but I gave it a little muscle with my hammer and punch and lined up. Holds vortex venom on slide securely; now only time will tell to see how it holds up. I doubt it's going anywhere.
CZ P09 red dot mount
Used this to mount a Vortex Venom on a CZ P-09. Well made, easy to install, don’t see any reason why it won’t stay put. A great option to install a red dot on a nonoptic handgun. I have put a couple of hundred rounds through it with no problems, with the mount or the sight.
Mount worked well but, needed help with screws and no one responded to my e-mails.
The mount was as described however, the optic I was mounting required longer screws. It wasn't a shortcoming of the mount but I needed customer assistance. I asked if they had longer screws or could tell me the size of the screw I needed. No response to 2 e-mails a week apart. So, product was good but customer service as bad.
- 1