EGW Dovetail Sight Mount For DeltaPoint Pro for GI 1911
Not Yet Rated | Write the First Review SKU: 198-49423
UPC: 841370107285
MFG#: 49423

EGW Dovetail Sight Mount For the DeltaPoint Pro (fits Bushnell RXS-250/100, Shield RMS/RMSc/SMS & more) for GI 1911

Mounting Hardware is Included

This mount fits:

• 1911s with a G.I. style rear sight cut
• Springfield 1911A1
• Iver Johnson 1911A1
• Iver Johnson 1911A1 9
• Iver Johnson Falcon 45
• Iver Johnson Thrasher 45
• Iver Johnson Thrasher 9
• Iver Johnson 1911A1 Chrome 38W
• Iver Johnson 1911A1 Chrome 38P
• Iver Johnson 1911A1 CHRW45
• Iver Johnson 1911A1 CHR45P
• Iver Johnson 1911A1 CHR45WP
• Iver Johnson 1911A1 Zombie
• Iver Johnson 1911A1 Copperhead
• Iver Johnson 1911A1 Water Moccasin
• Iver Johnson 1911A1 Boa
• Iver Johnson 1911A1 Muddy Girl 9mm
• Iver Johnson 1911A1 Digital Navy
• Iver Johnson 1911A1 Digital Snow 45ACP

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment:

• Bushnell RXS-100
• Bushnell RXS-250
• Bushnell RXU-200
• Crimson Trace CTS-1500
• Holosun 407K*
• Holosun 507K*
• Holosun EPS Carry*
• Jpoint
• Leupold DeltaPoint Pro
• Optima
• Redfield Accelerator
• Shield RMS
• Shield RMSc
• Shield SMS
• Sig Romeo Zero
• Vortex Defender-CCW
• Vortex Defender-ST
• Vortex Defender-XL

(*with Modification, the rear two locater pins on the plate must be filed off in order to allow the 407K/507K to fit.)

EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.\

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

The distinction between inferior quality and premium scope mount is undeniable. At MSP, we only offer red dot mounts from the most trusted brands like Evolution Gun Works. Buy with confidence that we stand behind the product we sell.